BREVILLE DUAL BOILER BES900/BES920 SURVIVAL / SERVICE KIT (120v 240v)

Survive the Coffee Machine Apocalypse with Our Ultimate Dual Boiler Survival / Service Kit!

Whether it's a faulty pump, a buzzing solenoid, or a leaky seal, this kit allows you to carry out an essential service and/or repair of all the common faults these machines suffer from.

Compatible with all Breville Dual Boilers (240v and 120v). 

Feel free to message me before purchasing if you need any advice before ordering. I can sometimes include other parts too that aren't listed.

Some of the problems this kit will fix are:

• Loss of preinfusion
• Buzzing / Faulty Solenoid
• Weak Pressure
• Leaking Seals
• Overheating / Underheating
• Dripping Steam Wand
• 3 beeps of death
• Steam boiler not filling
• Broken lid latch

12x Small o-rings for hose connectors (water/steam) and NTC probes.

5x Large o-rings for thermal and water level probes.

5x Tiny o-rings for water level probes - including 2 spares as they can damage easily

1x 10g tube of Food Grade Silicone Grease

1x Group Head Gasket/Seal

1x Vacuum Valve o-ring to fix leaking steam

Full set of seals used for the Breveille Dual Boiler Steam Valve. This will allow you to refurbish your valve and fix most leaking or dripping issues.

Replacement (Brand new Genuine OLAB made) solenoid piston plus o-rings** for Breville Dual boilers with OLAB branded coffee solenoids.

** It's recommended to use existing Breville washers/pins instead of supplied type if condition is fine. However, the supplied o-rings are original OLAB type and suitable for situations where conditions of the plate are not perfect.

If your machine is has developed a heating problem caused by leaking orings, then this kit will save you money on a new board.

This kit includes a triac for the steam or coffee circuit and the group head circuit

These components will work on both 240v and 120v versions. SP0010242 / SP0001772

https://www.youtube.com/watch?v=yrz7l5y2xlA

Fixes weak pressure or loss of pre-infusion on the Coffee Pump (EP5 / EFP5 & Post 2021 EFM) and Steam Pumps (NMEHP)

1x Polypropylene pump valve ball 

1x EPDM Coffee pump piston oring

1x Steam pump piston oring

https://www.youtube.com/watch?v=Gcuq22CC5kc

Should the worst happen, then this will get you back on track. You'll get both types of fuses to cover any of the thermal fuses in the machine. There is also a steam boiler thermal switch as you'll likely need this if your machine has the 3 beeps of death.

https://www.youtube.com/watch?v=lcWhYbNrwV4

Over time the top access panel latch can wear out or break off. We have you covered too with an easy to fit replacement.

We know how easy these are to lose inside a machine, that's why we are now including a handy replacement

Includes all the connectors you'll need to carry out any of the repairs

Thanks

For more info, please check out this channel on Youtube:

https://www.youtube.com/@BrevTech